MC Ju106 80s <3 by Michał Cacko
Oscillator 1 timbre
Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is set to 74% (50% is perfectly square, 100% is very short pulsewave) and is modulated by LFO 1.
LFO 1 direct modulation amount for pulse width of square oscillator is 125.
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 102.
Tone for oscillator 2 is off.
Volume (VCA) volume
Amplification level is set to -2.4dB (136) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is off.
Noise timbre
Noise level is manually set to 135.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 1373.27Hz (141) and is modulated by VCF Env.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 88.
Filter resonance is statically set to 11% (28).
Performance triggering timbre
Envelope triggering mode is set to mono.
Oscillators are reset on keyboard presses.
Oscillator 1 pitch pitch
Oscillator 1 pitch is modulated by LFO 1.
LFO 1 direct modulation amount for oscillator 1 pitch is 16.
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is manually set to 0. Effect 2 level is off. Effect 3 level is off. Effect 4 level is off.
Reverse Reverb fx
not yet complete
LFO 1 modulator
Controls OSC 1 Pulse Width Modulation Depth, OSC 1 Pitch.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | OSC 1 Pulse Width Modulation Depth | 125 |
| pitch | fader | OSC 1 Pitch | 16 |
| name | value |
|---|---|
| LFO 1 Rate | 1.92Hz (133) |
| LFO 1 Delay / Fade | 0s (0) |
| LFO 1 Shape | Triangle |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 1 |
| LFO 1 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0.69s (98) |
| VCA Envelope Decay Time | 0.39s (66) |
| VCA Envelope Sustain Level | 11% (29) |
| VCA Envelope Release Time | 3.53s (175) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 88 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0.69s (98) |
| VCF Envelope Decay Time | 0.39s (66) |
| VCF Envelope Sustain Level | 11% (29) |
| VCF Envelope Release Time | 3.53s (175) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |